What Is The Working Principle Of Slitting Rewinder?

The working principle of slitting rewinder is as follows: 1.the slitting control of the slitting rewinder is divided into static and dynamic slitting:stop the machine accurately when the set length is reached,then conduct static slitting processing,and restart the operation after slitting;When the set length is reached,the machine will send a cutting signal without stopping the machine. 2.the slitting and rewinding machine shall cut the whole roll or sheet of raw materials in fixed length,such as plastic packaging materials,packaging cartonts,steel plates,films,leather,wood chips,etc.,all of which shall use the fixed length slitting control. 3.the slitting length can be set continuously.If the actual slitting length has errors,it is easy to calibrate by setting parameters. The upper end of the slitting and rewinding machine is equipped with a main cutter shaft,which is arrangeg on several blades according to a certain gap;The top of the slitting rewinder is also provided with a support frame of the main cutter shaft,and a support cylinder is installed in the middle of the support frame.