When using the PE film blowing machine,if you suddenly find that the film transparency of the PE film blowing machine is very poor,then don't worry,just check carefully according to the following three methods to solve the problem
1.The extrusion temperature is low and the melt plasticization is poor,so the melt temperature should be appropriately increased.
2.The cooling effect is poor,affecting the transparency,so the cooling air volume should be appropriately increased.
3.Resin particles contain a large amount of water,and the particles should be fully dried.
When using the PE film blowing machine,please operate in strict accordance with the instructions,and regularly maintain and troubleshoot the PE film blowing machine.
