The high-speed heat-sealing and heat-cutting vest bag making machine is a fully automatic plastic bag-making equipment, mainly used to process PE (polyethylene) plastic film into supermarket shopping vest bags (also known as waistcoat bags or T-shirt bags). This machine adopts a heat-sealing and hot-cutting process, with sealing and cutting completed simultaneously. It features high production efficiency, excellent bag quality, and a high degree of automation.
一,Main Features
- Adopts PLC computer control system and touch screen human-machine interface, featuring intuitive and simple operation.
- Equipped with servo motor traction and photoelectric eye color mark tracking to ensure high dimensional accuracy of finished bags.
- Dual-channel design enables simultaneous production of two bags, doubling the output efficiency.
- Integrated hot sealing and cutting process delivers firm sealing edges and smooth, burr-free cuts.
- Automatic handle hole punching with waste material collection function.
- Supports automatic counting and fixed-quantity automatic shutdown functions.
- Built-in automatic deviation correction system to ensure stable and tidy film feeding.
二,Equipment structural composition
1.The high-speed heat-sealing and heat-cutting vest bag making machine mainly consists of the following parts:
2.Unwinding rack: It is used to place plastic film rolls and is equipped with an automatic deviation correction and tension control device
3.Feeding traction mechanism: The servo motor drives the traction roller to precisely control the feeding length
4.Photoelectric tracking system: Identify the color mark of the printed film to ensure accurate pattern positioning
5.Heat-sealing and cutting mechanism: It completes the sealing and cutting of the bag, with the hot knife and cold knife working in coordination
6.Punching mechanism: Pneumatic punching for the hand-held holes of the vest, equipped with waste material collection
7.Discharge conveying mechanism: Conveys finished bags and automatically stacks them
8.Electronic control system: PLC controller, touch screen operation interface, temperature controller, etc
9.Pneumatic system: air compressors, cylinders, solenoid valves and other pneumatic components
三, Equipment Installation Steps
1. Equipment positioning: Use a forklift or crane to move the equipment to the installation position. Adjust the anchor bolts to ensure the equipment is placed horizontally, with a horizontal error not exceeding 2mm/m.
2. Power connection: Have a professional electrician connect the power cord according to the electrical schematic diagram, confirm that the power voltage and phase sequence are correct, and ensure reliable grounding.
3. Air source connection: Connect the compressed air pipe to the air inlet of the equipment, install the air filter and pressure regulating valve, and adjust the air pressure to 0.6-0.7MPa.
4. Equipment inspection: Check whether the fasteners at all parts are loose, whether the transmission components are flexible, and whether the electrical connections are reliable.
5. Add lubricating oil: Add lubricating oil or grease to each lubrication point as per the lubrication requirements.
6. No-load test run: Connect the power supply, start the motor, and check whether the rotation direction of each motor is correct, whether the operation of each mechanism is smooth, and whether there is any abnormal noise.
四,Startup Process
1. Connect the main power supply: Turn on the main power switch of the electrical control cabinet and check if the power indicator light is on.
2. Start the control system: Turn on the power of the touch screen, wait for the system to start up completely, and then enter the main operation interface.
3. Connect the air source: Open the compressed air intake valve and check if the pressure gauge display is normal.
4. Set the temperature: Set the temperatures of the heat sealing knife and the hot cutting knife on the temperature control interface, press the heating switch, and the temperature will start to rise.
5. Wait for the temperature to rise: Wait for the temperature to reach the set value and stabilize, which usually takes 15 to 20 minutes.
6. Set parameters: Set production parameters such as bag-making length, bag-making speed, and counting quantity on the touch screen.
7. Threading and feeding: Thread the plastic film according to the threading steps.
8. Prepare for production: Confirm that all preparations have been completed and notify the surrounding personnel to pay attention to safety.
