The slitter is a prepress that cuts a large roll of paper,film,mica tape and other thin materials into small rolls of different widths.It is commonly used in paper-making machinery and printing and packaging machinery.The connection of the ,ain power of the slitter is a very important thing.Only qualified technicians can connect the main power supply of the machine and equipment.The power supply voltage of the machine is generally above 220 volts.So you know how to connect the main power of the slitter?
The connection of the slitter circuit must be consistent with the circuit diagram in this operation manual.After the circuit diagram in this operation manual.After the circuit is connected,please connect the main power supply with three-phase voltage.The power specifications have been described on the nameplate of the machine,and then check whether the running direction of the motor is the same as the direction indicated by the arrow.The action should be completed before starting the machine.To check whether the running direction of the motor is correct,press the "oil pump off"button on the touch screen,and then press the "oil pump on"button to check the running direction on the motor.
The slitting machine has gooc wear resistance and lubricity.The purpose is to reduce mechanical friction and ensure the corresponding oil film strength under different conditions such as pressure,speed and temperature.If the running direction is incorrect,change the running direction of the motor with the power wires of two phases,and then repeat this action until the motor has the correct running direction.
