In the whole plastic working environment,if the plastic granulator production line is abnormal,how should we disassemble it for inspection?In the following seven elements,we must keep them in mind.At the same time,we must know the construction principle of the plastic granulator production line and parts to avoid damage to the parts during disassembly.
Before disassembly,dirt,oil stain and other impurities on the surface shall be removed first.During disassembly,the cleanliness of the plastic granulator production line shall be maintained at all times.
When disassembling the plastic granulator production line,it is necessary to use appropriate tools,and do not hit or knock hard to avoid damage,deformation and other abnormal conditions of part.
Disassemble the machinery according to the required procedures,and disassemble as little as possible.
When disassembling the plastic granulator production line,it is necessary to prepare for assembly,improve assembly efficiency and ensure the correctness of assembly.During disassembly,pay attention to check and record the specific location of each part.
At the same time,the plastic granulator production line shall be disassembled according to the correct sequence.Generally,from accessories to main parts,the whole machine shall be disassembled into assemblies,then the assemblies shall be disassembled into components,and then the components shall be disassembled into parts.
After all parts are disassembled,they shall be classified and stored in detail according to the material properties and parts accuracy.
